博航智能圈

标题: How to Run Ubuntu 10.04 on your PandaBoard(2) [打印本页]

作者: kztop1 时间: 2011-9-6 13:04:17 标题: How to Run Ubuntu 10.04 on your PandaBoard(2)

Enabling the WiFi and BlueTooth on PandaBoard

There are some more information on this topic, but I did not test it my self at all. So, in a little while I will be add more details on that.
So far, I failed to do this! my only solution was to go back and install the full Ubuntu 11.04 as described above and it had everything working

Install SSH and Configure it to have a better security to be able to connect to the board later for development

Open a terminal and make sure you update the system first
- sudo apt-get install
Now, type sudo apt-get install ssh and confirm when asked to do the download
Once it is done, you have ssh installed and running but we need to configure it to have a better security, why? because, someone on the net can be scanning for open ports and the default port for SSH, 22, is known to everyone. So we change it to random number to prevent anyone from hacking into our PandaBoard
You need to edit file /etc/ssh/sshd_config "sudo nano /etc/ssh/sshd_config"
Find the port 22 and change it to some number that you can remember later
Done, save the file and exit
Restart ssh "sudo service ssh restart"
From your host computer connect to PandaBoard "ssh -p portnumber ipaddress"
Enter the new password for the currect user on your PandaBoard
You are in!

Change you HostName of your PandaBoard

You might want to change your default hostname of your PandaBoard.  Well, this is the name that your PandaBoard will have on the network, I am sure you want to have a unique name for your board.  You do that by modifying the hostname file located in the /etc/
sudo nano /etc/hostname
You should see a file opened with a single line that represents your PandaBoard HostName
Now you can change this name make sure it is proper name that does not have spaces, etc..
Now save and exit the file  Ctrl-x then hit y for yes to save the file
When you restart the board, you should be able to see this name on the network and on the Terminal prompt.

Install Ubuntu natty 11.04 the OMAP4 Image
Install xfce4 as desktop on Ubuntu natty
Install Install Geany and Code:Blocks
Install Ubuntu-omap4-extras http://omappedia.org/wiki/Ubuntu_PPA
Fix xfce4 Applications Menu disappearance!  remove ./config/menus/ settings.menu and xfce-applications.menu files

欢迎光临博航智能圈 (http://club.broadon.net/club/)